You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The Info view is used for two purposes; display the progress of an image exposure and set certain exposure/image related parameters in LOIS.

LOIS parameters

This view can and should be used for setting the following parameters in LOIS:

  • Observer Info
    • Names
    • Affiliations
  • Image Info
    • File Path; default value from config file
    • Root File Name; default value from config file
    • Initial Image Number; defaults to 1
    • Directory Path Date Extension; default value from config file
    • FITS Extension; default value from config file
    • Image Number Separator; default value from config file

Information Display

This view is used to display the following information:

  • Exposure Progress Bar
  • CCD Readout Indicator
  • Observer Info
  • Image File Info (path & name)
  • Disk Storage Info

"Note: Does NOT display current LOIS values"

"Send Commands To Lois - Check LOIS Log to See If Successful"
"You can Change Observer or Path Information Independently,"
"If Either of the two AREAS is blank it will remain as it was."

  • No labels