...
This is an enlarged image which can be seen more clearly than the Thumbnail or Detailed Aspects can offer. The initial image when received, is displayed at a 1:1 ratio. If the image is larger than the client area, the display starts at the center of the image. The cursor location on this aspect will relate to the Pixel Matrix and Line Profiles when toggled.
Fine Movement on the Image
...
Adjusts the brightness of the image. The left arrow decreases the brightness and the right arrow increases the brightness.
Scale
Scale drop-down allows the user the image transform function. The upper part choses the function and the lower part the limits. The default is ZScale-Linear where zscale is based on the IRAF algorithm. "User Defined" brings up a dialog box with a display of the intensity histogram where the user can set the limits.TODO
Color
This provides a drop-down menu of available color maps that can be used as well as an invert-color option. The list and the RGB values were copied from IDL. The default is linear grey scale.
Define ROI
A way to define different types of regions of interest.
Move Target
A way to do collimation and pointing offsets from the imager.
Focus (LMI)
Allows initiating the focus script from the imager. The drop-down has 2 items; one for setting the parameters and the other one for initiating the command:
Selecting "Focus Parameters" brings up a dialog box which is pre-filled with the default values read from the config file:
For more information on the parameters and the inplacefocus script, you can refer to Autofocus Script (LMI) for LOIS.
The second item on the drop-down, "Mark & Initiate Focus Run", allows selection of a target star by clicking on it. The x & y coordinate of the star is included in the inplacefocus command sent to LOIS.
For more information on the parameters and the inplacefocus script, you can refer to Autofocus Script (LMI) for LOIS.