Page History

Image Modified The DCT name has changed to the Lowell Discovery Telescope (LDT).

This page gives a general overview for visitors and staff

...

(Please send us any comments or suggestions for ways to improve these pages.)

...

width	50%

Updates (and Old Updates)

UPDATE: Effective March 31, 2020, 5pm MST, LDT will cease night time observing operations until further notice. (2020Mar31).

UPDATE: The Discovery Channel Telescope (DCT) name has been changed; it is now the Lowell Discovery Telescope (LDT). (2020Feb19)

Expand

title	UPDATE: TCS has been updated, ephemeris tracking is again working. (2020Feb19)

The telescope control system (TCS) has been updated, and several issues fixed. One item of particular note to observers is that ephemeris based pointing and tracking is now functioning again. If you plan to use an ephemeris, please be in touch with staff ahead of your run to ensure that things work as expected. The ephemeris file format has changed slightly. For ephemerides extracted through the TCS, there shouldn't be an issue; if you generate your own ephemeris file, then you will need to make sure it conforms to the revised format. (2020Feb19)

Expand

title	UPDATE: NIHTS User Manual updated (2019Jan30)

An updated version of the NIHTS User Manual (v1.4 - 2019013) has been released and is available on the DCT confluence pages. Per the authors, NIHTS User Manual v1.4 adds a description of blind target acquisition using LMI.

Expand

title	UPDATE: LMI shutter delay. (2018Dec05)

We have looked into quantifying the delay between when a user requests an image with LMI, and when the shutter actually opens. Details can be found in the write up under the LMI link about the shutter delay. The bottom line is that:

The exposure times are as recorded to within a few hundredths of a second, based on the star streaks.
The shutter throw time in each direction is between roughly 0.1 and 0.2 seconds, meaning that there is also a temporal gradient across all the images.
Formal uncertainty on the measured time offsets are an underestimate of the true variation. The shutter throw time alone means the mid-time varies across the frame systematically by at least 0.1second (added as the systematic uncertainty below).
The shutter opens 2.05 +/- 0.06 (ran) +/- 0.1 (sys) seconds later than the UTCSTART in the image header.
The shutter closes 0.19 +/- 0.06 (ran) +/- 0.1 (sys) seconds earlier than the UTCEND in the image header.

Exposure times should be computed as:

Start time = UTCSTART + 2.05sec
End time = UTCEND - 0.19sec
Mid-time = UTCSTART + 2.05 + EXPTIME/2 or
Mid-time = [(UTCSTART + 2.05) + (UTCEND-0.19)] / 2

Expand

title	UPDATE: DeVeny User Manual updated v1.5 (2018July11)

The DeVeny Spectrograph Reference and Operations Guide has been updated for the new release of the slitviewing camera GUI application. Version v1.5 (10 July 2018) of the manual is now available on the Observing at DCT confluence page.